Osnovit cement remover Safesreen Extra SGL11
Osnovit Safescreen Extra SGL11 Cement Remover is designed for fast and easy removal of hardened concrete, cement, gypsum and lime-based mortars, plasters, polymer fillers, tile adhesives, grouts, water-dispersible paints, and efflorescence from any surface type — including construction tools. Particularly recommended after renovation or construction work. Also suitable for removing old cement-based grout from tile joints or cleaning out groove joints. Application Instructions Surface cleaning may begin only after the substrate is ready for subsequent work or final use, in accordance with the manufacturer’s recommendations for the materials used in finishing or construction. Before full application, test the cleaner on a small, soiled area. Apply the product locally only to contaminated areas, holding the spray bottle 15–20 cm from the surface. After 5–10 minutes, thoroughly rinse the treated area with plenty of water, using a stiff brush or scraper. Insufficient or improper rinsing may damage decorative surfaces. Repeat the procedure if necessary. The cleaner actively dissolves cement and gypsum. Avoid contact with surfaces not intended for cleaning. Do not use at temperatures below +5°C. Do not allow prolonged contact between the cleaner and the treated surface. Improper use may cause irreversible substrate damage.
Concrete, cement- and gypsum-based materials, water-dispersible coatings, ceramic, metal, and plastic surfaces.
Store out of reach of children.
In case of contact with eyes or skin, rinse thoroughly with plenty of water and seek medical attention immediately.
