Manufactured using biocidal agents and auxiliary additives.
This concentrate is designed for the rapid and effective elimination of fungi, mold, lichens, moss, algae, bacteria, spores, as well as soap and slime deposits from infested substrates. After treatment, it creates a protective barrier that prevents the recurrence of biological growth. It is recommended as a preventative treatment during renovation work prior to the application of leveling and decorative coatings such as plaster, fillers, paint, and tile adhesives. Application Areas: Interiors: Bathrooms, kitchens, dining areas, laundry rooms, basements, utility rooms, and any other areas with high humidity, condensation, or insufficient ventilation. It can also be used in living areas, including children's rooms, when necessary. Exteriors: Facades, plinths, balconies, and other damp locations. Suitable for both interior and exterior use.
Concrete, cement-based and gypsum-based materials, rubber, plastic.
Initial Treatment: Apply the product to the affected area by spraying from a distance of 15-20 cm.
Cleaning: Allow the cleaner to act for at least 2 hours. Then, perform mechanical cleaning of the surface using a wire brush or scraper to remove the residual biological growth.
Preventative Treatment: To protect against recurrence, apply the product to the substrate once more.
Drying Conditions: While the product is drying on the substrate, protect the treated area from direct sunlight. Shield it from water and precipitation until the surface is completely dry.
Curing Time: After the final treatment, allow 8-12 hours before proceeding with any further finishing work.
Temperature Limitation: Do not apply the antifungal solution at temperatures below +50°C.
Composition: Manufactured using biocidal agents and auxiliary additives.
Safety Precautions:
Shelf life:
Initial Treatment: Apply the product to the affected area by spraying from a distance of 15-20 cm.
Cleaning: Allow the cleaner to act for at least 2 hours. Then, perform mechanical cleaning of the surface using a wire brush or scraper to remove the residual biological growth.
Preventative Treatment: To protect against recurrence, apply the product to the substrate once more.
Drying Conditions: While the product is drying on the substrate, protect the treated area from direct sunlight. Shield it from water and precipitation until the surface is completely dry.
Curing Time: After the final treatment, allow 8-12 hours before proceeding with any further finishing work.
Temperature Limitation: Do not apply the antifungal solution at temperatures below +50°C.
