OSNOVIT FLYFORM ХС50 WP impemeable joint filler for clinker, granite and natural stone pavements
Tinting
NEW

OSNOVIT FLYFORM ХС50 WP impemeable joint filler for clinker, granite and natural stone pavements

Application

OSNOVIT FLYFORM XC50 Wp is engineered for joints in granite or clinker block pavements, natural stoner etc. to protect substrate from humidity ingress and overall nice appearance.
Suitable both for new pavements and joint restoration for sidewalks, garden and park paths, perimeter walks etc.
Withstands pedestrian and average loads (up to 3.5 tons).

RECOMMENDED SUBSTRATES

concrete, cast in situ reinforced concrete, OSNOVIT FLYFORM DC100 coating drainage mortar

RECOMMENDED MATERIALS

clinker, sawn and crushed stone block pavements, natural stone.

PACKAGE SIZE

25kg

*DISCLAIMER

Color perceived varies with illumination level, finish material, day time and other conditions.The color can be affected by water content, mixing practice and time interval, mortar curing conditions as well as the application tools (make sure the tools are free from dark metals and chemical components).

Please note that specification colors correspond to fully cured material only.

Used with this material

Characteristics

Color white
Compression strength 30
Substrate adhesion 0.3
Max. aggregate particle size 2.5
Recommended layer thickness 10-30
Mix consumption rate for 10 mm layer 16
Water consumption rate per 1 kg 0,12-0,14
Mortar life time 2 hours
Joint width 5-50 мм
Correction time 10 min
Service walking in 24 hours
Pedestrian load 7 days
Full load in 28 days
Freeze/thaw durability 100
Service temperature -50…+60
Ambient and substrate temperature +5°С…+30°С
Shelf life 12 месяцев
Package size 25 kg

Documentation

Photo

Reference objects


SIGN UP FOR A FREE SEMINAR/WEBINAR

Organizer: Technical Center CEDRUS
SIGN UP
CLOSE A WINDOW